Influence of spew fillets geometry on the bond strength of adhesively bonded FRP composite elements
Abstract
The adhesive bonding is a suitable joining technique for structural assemblies made of composite materials. Adhesive bonding of fibre reinforced polymer (FRP) composite elements is utilised in several applications, including surface repairing for various composite materials, strengthening/retrofitting techniques and, as a sustainable alternative/replacement, when mechanical fastening methods are not suitable.
This paper focuses on some specific aspects related to the influence of stress reduction methods using various spew fillets on the structural response of adhesively bonded FRP composite elements. Also, this paper presents the influence of the adhesive spew fillet geometry on the peak values and on the distributions of the shear and the normal stresses in adhesively bonded FRP composite members.
Keywords
Full Text:
PDFReferences
Oprișan, G., Țăranu, N., Mihai, P., Ențuc, I., S., Maxineasa, S., G., Lupășteanu V., Structural response of pultruded GFRP profiles subjected to bending, Bulletin of the Polytechnic Institute of Jassy, vol 62(66), 3, 2016.
Lupășteanu, V., Țăranu, N., Mihai, P., Oprișan G., Lupășteanu, R., Ungureanu, D., Behaviour of CFRP-to-steel interfaces in adhesively bonded joints, Rev Rom Mat, 44, 4, 2016.
Rispler, A., R., Tong, L., Steven, G., P., Wisnom, M., R., Shape optimization of adhesive fillets, International Journal of Adhesion & Adhesives, 20, 2000.
Ungureanu, D., Țăranu, N., Lupășteanu, V., Mihai, P., Dupir (Hudișteanu), I., Behaviour of composite-to-composite interface for adhesively bonded joints. Experimental set-up, Bulletin of the Polytechnic Institute of Jassy, vol 62(66), 3, 2016.
Tong, L., Steven, G., P., Analysis and design of structural bonded joints, Dordrecht, Kluwer, Netherland, 1999.
Belingardi, G., Goglio, L., Tarditi, A., Investigating the effect of spew and chamfer size on the stresses in metal/plastic adhesive joints, International Journal of Adhesion & Adhesives, 22, 2002.
Tsai, M., Y., Morton, J., The effect of a spew fillet on adhesive stress distributions in laminated composite single-lap joints, Composite Structures, 32, 1995.
Akpinar, S., Doru, M., O., Ozel, A., Aydin M., D., Jahanpasand H., G., The effect of the spew fillet on an adhesively bonded single-lap joint subjected to bending moment, Composites Part B, 55, 2013.
Vallee, T., Tannert, T., Murcia-Delso, J., Quinn, D., J., Influence of stress-reduction methods on the strength of adhesively bonded joints composed of orthotropic brittle adherents, International Journal of Adhesion & Adhesives, 30, 2010.
Rispler, A., R., Tong, L., Steven, G., P., Wisnom, M., R., Shape optimization of adhesive fillets, International Journal of Adhesion & Adhesives, 20, 2000.
Kilic, B., Madenci, E., Ambur, D., R., Influence of adhesive spew in bonded single-lap joints, Engineering Fracture Mechanics, 73, 2006.
R., Haghani, Finite element modelling of adhesive bonds joining fibre-reinforced polymer (FRP) composites to steel in Karbhari, V., M., (editor) Rehabilitation of metallic civil infrastructure using fiber reinforced polymer (FRP) composites, Woodhead Publishing, Texas, SUA, 2014.
Ungureanu, D., Țăranu, N., Dupir (Hudișteanu), I., Florența, I., Lupășteanu, V., Shear structural response of adhesive joints for FRP composites, Advanced Engineering Forum, 21, 2016.
H. Thorning, Fiberline Design manual, Flat profiles, plates and sheets, Chapman & Hall, London, UK, 2012.
Technical data sheet - Sikadur – 30, Id no. 02 04 01 04 001 000001, 21,01,2008, Brașov.
Refbacks
- There are currently no refbacks.
Copyright (c) 2018 INTERSECTII / INTERSECTIONS
Indexed
