Coating of concrete structures exposed to corrosive media

Vit Petranek

Abstract


The paper describes research and development of protective materials based on polymer resins. Instead of usual filler, ground quartz sand, several types of industrial wastes were used. Main aim of the research was to determine the most suitable type of industrial waste material, its treatment and last but not least amount of filler. On the contrary to silicate coatings the polymer-based coatings are not so “sensitive†to chemical composition of the filler. Paper describes methodology, carried out tests, results and possible outcome of the research

Full Text:

PDF

References


Drochytka, R., Petranek, V., Atmospheric Concrete Deterioration, in Concrete Structures in the 21st Century, Japan Concrete Institute, FIB Conference, 1st ed. Osaka, 2002, vol. 2, 10 p.

Petranek, V., Hudec, P., Silicate Coatings with Waste Materials, in Proceedings of WTA International Conference, 1st ed., Brno: VUT Brno, 2003, ISBN 80-02-01538-X.

Petranek, V Kohutova, N., Surface Treatment as the Final Stage of Concrete Repair Works, in Proceedings of VIth International Conference OTMC, 1st ed., Zagreb: University of Zagreb, 2003, ISBN 953-96245-5-X, pp. 234-241.

Petránek, V., Hudec, P. Protection of Concrete by Silicate Coating with the use of Waste Raw Materials. Conference proceeding of EUROMAT, Lausanne, Switzerland, [online], 2002 http://webdb.dgm.de/tagprog/FMPro.


Refbacks

  • There are currently no refbacks.


Copyright (c) 2015 INTERSECTII / INTERSECTIONS

Indexed

Google Scholar    Directory of Research Journals Indexing